46–60 W DC/DC Power Modules 24 V Input Series
• Efficiency typ 84% at 5 V and full load
• Low profile 11.0 mm (0.43 in.)
• 1,500 V dc isolation voltage (duals = 1,000 Vdc )
• MTBF >200 years at +75°C case temperature
• Rugged mechanical design and efficient thermal management, max +100°C case temperature
• EMI measured according to EN 55 022 and FCC part 15J
The PKG 2000 I series of low profile DC/DC Power Modules are intended as distributed power sources in decentralized +24 V DC power systems. They can be used as on-board distributed power modules, or serve as building blocks for more centralized power boards. The PKG series of DC/DC power modules provide up to 60W of output power utilizing the standard EriPower™ PKA/PKE pin-out, with an even smaller footprint, and a power density of 20 W/cu.in. The high efficiency makes it possible to operate over a wide temperature range without any extra heatsinks. At forced convection cooling >200 lfm (1 m/s), the PKG units can deliver full power without heatsinks up to +60°C ambient. With derated output power it can also operate in temperature controlled environments with free convection cooling. By adding external heatsinking, the temperature range can be extended even further. Thanks to their peak power capability, the PKG series is ideal for applications where max power is only required during short durations e.g. in disc drives. 
DC/DC: 24V-5V-60W; 46-60 W DC/DC Power Modules 24 V Input Series